日韩精品区一区二免费_av超碰av超碰人人爱_亚洲av女人的天堂_日本五月峰子在线观看

產品詳細介紹

SU-1b鎳銅鈷礦石成分分析標準物質Nickel-Copper-Cobalt Ore

Table 1 - SU-1b Certified Values
Element Units Mean Within-lab Standard Deviation Between-labs Standard Deviation 95% Confidence Interval of Mean
Ag μg/g 6.39 0.34 0.21 0.12
Al* % 4.30 0.07 0.20 0.10
As μg/g 2.49 0.33 0.58 0.40
Ca* % 2.21 0.03 0.11 0.06
Co % 0.0672 0.0013 0.0034 0.0013
Cu % 1.185 0.019 0.037 0.014
Fe % 25.54 0.30 0.68 0.27
Mg* % 1.790 0.026 0.098 0.051
Mn* % 0.0703 0.0010 0.0028 0.0019
Ni % 1.953 0.029 0.044 0.017
Pb μg/g 58 3 10 5
Pd μg/g 0.791 0.038 0.040 0.025
Pt μg/g 0.491 0.042 0.035 0.022
S % 14.14 0.21 0.23 0.11
Si** % 15.23 0.25 0.31 0.22
Zn μg/g 235 9 30 19
* Excludes digestions with two acids (usually nitric and hydrochloric) as statistical outliers.
** Fusions only.
Table 2 - SU-1b Provisional Values
Element Units Mean Within-lab Standard Deviation Between-labs Standard Deviation 95% Confidence Interval of Mean
Bi* μg/g 2.73 0.50 0.63 0.70
Se μg/g 20.7 0.7 4.3 2.3
V* μg/g 82.5 2.3 4.7 4.4
*  Statistical analysis of the results warrants classification as provisional, despite only 6 data sets for bismuth and 7 data sets for vanadium.
Table 3 - SU-1b Informational Values
Element Units Mean No.
accepted
laboratories /
values
Au μg/g 0.2
   17  / 80

Ba μg/g 350 3  / 14
Be μg/g 0.4 3  / 15
C % 0.04 3  / 14
Cd μg/g 3 4  / 20
Ce μg/g 35 4  / 20
Cr μg/g 320 7  / 35
Cs μg/g 0.3 4  / 20
Dy μg/g 1.4 3  / 15
Er μg/g 0.7 3  / 15
Eu μg/g 0.7 3  / 15
Ga μg/g 10 4  / 20
Gd μg/g 2 3  / 15
H2O (105°C) % 0.6 2  / 10
Ho μg/g 0.3 3  / 15
K % 0.6 4  / 18
La μg/g 17 4  / 20
LOI* % 8 3  / 15
Lu μg/g 0.09 3  / 15
Mo μg/g 4 5  / 25
Na % 1.6 5  / 24
Nb μg/g 3 3  / 15
Nd μg/g 15 3  / 15
P % 0.06 5  / 25
Rb μg/g 13 4  / 20
Sb μg/g 0.2 3  / 15
Sc μg/g 9 4  / 20
Sm μg/g 3 4  / 20
Sr μg/g 280 6  / 29
Tl μg/g 0.3 4  / 20
U μg/g 0.2 4  / 19
Y μg/g 7 4  / 20
Yb μg/g 0.6 4  / 20
*  Loss on ignition.
Source
SU-1b is a nickel-copper-cobalt ore from Copper Cliff, Ontario, Canada. The raw material was donated by Vale Inco Limited, and was obtained from the same mine as its predecessors, SU-1 and SU-1a, which are no longer available.
Description
The mineral species include: pyrrhotite (24.4 %); plagioclase (21.8 %); quartz (11.0 %); magnetite (7.3 %); ferrohornblende (6.7 %); pentlandite (5.4 %); clinochlore (5.2 %); K-feldspar (4.5 %); chalcopyrite (3.3 %);  pyrite (3.2 %); enstatite (1.5 %); epidote (1.3 %); augite (1.0 %); biotite (1.0 %); talc (0.6 %); various other minor silicates (0.5 %); actinolite (0.4 %); hypersthene, ilmenite and titanite, all at 0.2 %; and barite, berthierine, dolomite and  lizardite, all at 0.1 %.
Intended use
SU-1b is suitable for the analysis of nickel, copper, cobalt, platinum, palladium and various other elements at major, minor and trace levels in ores.  Examples of intended use include quality control and method development.
Instructions for use
SU-1b should be used “as is”, without drying. The contents of the bottle should be thoroughly mixed before taking samples.  The contents of the bottle should be exposed to air for the shortest time possible. Unused material should be stored under an inert gas in a desiccator, or in a new, heat-sealed laminated foil pouch.  The values herein pertain to the material when produced. CanmetMINING is not responsible for changes occurring after shipment.
Handling instructions
Normal safety precautions for handling fine particulate matter are suggested, such as the use of safety glasses, breathing protection, gloves and a laboratory coat.
Method of preparation
The raw material was crushed, ground and sieved to remove the plus 74 μm fraction.  The recovery was 82%.  The product was blended, and then bottled in 200-gram units.  Each bottle was purged with nitrogen and sealed in a laminated polyethylene - foil pouch.